Citation: | Chinese Journal of Ship Research. Contens of CJSR 2017, Vol.11, No.2[J]. Chinese Journal of Ship Research, 2017, 12(2). |
[1] |
罗天,万德成. 基于CFD的船舶横摇数值模拟与粘性效应分析[J]. 中国舰船研究, 2017, 12(2):1-11, 48. LUO T,WAN D C. Numerical analysis of viscous effect on ship rolling motions based on CFD[J]. Chinese Journal of Ship Research, 2017, 12(2):1-11, 48.
|
[2] |
魏成柱,易宏,李英辉. 新概念高速穿梭艇系列船型及其直航性能[J]. 中国舰船研究, 2017, 12(2):12-21. WEI C Z,YI H,LI Y H. Hull forms and straight forward CFD free running trials of high-speed shuttle vessels[J]. Chinese Journal of Ship Research, 2017, 12(2):12-21.
|
[3] |
钱浩,宋科委,郭春雨, 等. 喷水推进器流道对船舶阻力性能的影响[J]. 中国舰船研究, 2017, 12(2):22-29. QIAN H, SONG K W, GUO C Y, et al. Influence of waterjet duct on ship's resistance performance[J]. Chinese Journal of Ship Research, 2017, 12(2):22-29.
|
[4] |
郑平宇,李鹏,刘敬喜, 等. 两船并行补给过程中耐波性的分析[J]. 中国舰船研究, 2017, 12(2):30-40, 48. ZHENG P Y, LI P, LIU J X, et al. Seakeeping analysis of two ships advancing parallel for underway replenishment[J]. Chinese Journal of Ship Research, 2017, 12(2):30-40, 48.
|
[5] |
张玉梅. 舰船人-机-环系统工程研究综述[J]. 中国舰船研究, 2017, 12(2):41-48. ZHANG Y M. A review of warship man-machine-environment system engineering[J]. Chinese Journal of Ship Research, 2017, 12(2):41-48.
|
[6] |
王晓强,刘怀西,马山, 等. PIV技术在某驳船模型强迫横摇水动力测试中的应用[J]. 中国舰船研究, 2017, 12(2):49-56. WANG X Q, LIU H X, MA S, et al. Investigation of the hydrodynamic model test of forced rolling for a barge using PIV[J]. Chinese Journal of Ship Research, 2017, 12(2):49-56.
|
[7] |
卢永进,吴波,李涛涛. 基于CATIA V6的船舶风管数据分析[J]. 中国舰船研究, 2017, 12(2):57-62. LU Y J,WU B,LI T T. Data analysis of ship ventilation ducts based on CATIA V6[J]. Chinese Journal of Ship Re-search, 2017, 12(2):57-62.
|
[8] |
徐嘉启,熊鹰,王展智. 混合式CRP推进器操舵工况水动力性能数值研究[J]. 中国舰船研究, 2017, 12(2):63-70, 99. XU J Q, XIONG Y, WANG Z Z. Numerical research of hydrodynamic performance of hybrid CRP podded propulsor in steering conditions[J]. Chinese Journal of Ship Research, 2017, 12(2):63-70, 99.
|
[9] |
周轶美,张书谊,卢溦, 等. 高效翼型舵在潜艇上的应用[J]. 中国舰船研究, 2017, 12(2):71-77. ZHOU Y M,ZHANG S Y,LU W, et al. High-efficiency airfoil rudders applied to submarines[J]. Chinese Journal of Ship Research, 2017, 12(2):71-77.
|
[10] |
于安斌,叶金铭,张凯奇. 非均匀来流中加工误差螺旋桨的轴承力数值模拟[J]. 中国舰船研究, 2017, 12(2):78-83. YU A B, YE J M, ZHANG K Q. Numerical simulation on bearing force of propeller for machining errors in non-uniform inflow[J]. Chinese Journal of Ship Research, 2017, 12(2):78-83.
|
[11] |
刘俊峰,胡志强. 船舶碰撞机理三维解析法实现及恢复系数研究[J]. 中国舰船研究, 2017, 12(2):84-91. LIU J F, HU Z Q. 3D analytical method for the external dynamics of ship collisions and investigation of the coefficient of restitution[J]. Chinese Journal of Ship Research, 2017, 12(2):84-91.
|
[12] |
熊景毅,刘勇,马建军. 球-环-柱组合壳结构的应力特性分析[J]. 中国舰船研究, 2017, 12(2):92-99. XIONG J Y,LIU Y,MA J J. Stress strength characteristics analysis of sphere-toroid-cylinder combined shell[J]. Chinese Journal of Ship Research, 2017, 12(2):92-99.
|
[13] |
曾凡明,刘金林,赖国军. 舰船动力装置多学科集成设计优化方法[J]. 中国舰船研究, 2017, 12(2):100-106, 115. ZENG F M, LIU J L, LAI G J. Multidisciplinary integrated design optimization methodology of marine power plants[J]. Chinese Journal of Ship Research, 2017, 12(2):100-106, 115.
|
[14] |
刘永葆,刘建华,余又红, 等. 燃气轮机热障涂层高温腐蚀研究综述[J]. 中国舰船研究, 2017, 12(2):107-115. LIU Y B,LIU J H,YU Y H, et al. Review of hot corrosion of thermal barrier coatings of gas turbine[J]. Chinese Journal of Ship Research, 2017, 12(2):107-115.
|
[15] |
徐超,刘刚,徐国华, 等. 基于泵控液压舵机的潜艇深度及纵倾控制[J]. 中国舰船研究, 2017, 12(2):116-123. XU C,LIU G,XU G H, et al. The depth and pitch control of submarines based on the pump-hydraulic servo[J]. Chinese Journal of Ship Research, 2017, 12(2):116-123.
|
[16] |
张玮康,王冠学,徐国华, 等. 腹部作业型水下机器人控制系统研制[J]. 中国舰船研究, 2017, 12(2):124-132. ZHANG W K,WANG G X,XU G H, et al. Development of control system in abdominal operating ROV[J]. Chinese Journal of Ship Research, 2017, 12(2):124-132.
|
[17] |
马建文,张安西,周兆欣, 等. 小水线面双体船五自由度运动建模与仿真[J]. 中国舰船研究, 2017, 12(2):133-136, 150. MA J W, ZHANG A X, ZHOU Z X, et al. Modeling and simulation of five DOF motions for SWATH ships[J]. Chinese Journal of Ship Research, 2017, 12(2):133-136, 150.
|
[18] |
方雄兵,李涛涛. 维修部位导向的可视性分析方法[J]. 中国舰船研究, 2017, 12(2):137-142. FANG X B,LI T T. A method for maintained part oriented visibility analysis[J]. Chinese Journal of Ship Research, 2017, 12(2):137-142.
|
[19] |
付森宗,王鸿东,易宏. 舰船建造质量量化评价方法[J]. 中国舰船研究, 2017, 12(2):143-150. FU S Z,WANG H D,YI H. Quantitative analysis method for ship construction quality[J]. Chinese Journal of Ship Research, 2017, 12(2):143-150.
|