Mechanical analysis about the gas spring support structure of the display and control console

Niu Feng

doi:10.19693/j.issn.1673-3185.01356

Volume 14 Issue S1

Dec. 2019

Turn off MathJax

Article Contents

Abstract

References

Chinese Journal of Ship Research > 2019 > 14(S1): 165-169, 188. > DOI: 10.19693/j.issn.1673-3185.01356 CSTR: 32390.14.j.issn.1673-3185.01356

Niu Feng. Mechanical analysis about the gas spring support structure of the display and control console[J]. Chinese Journal of Ship Research, 2019, 14(S1): 165-169, 188. DOI: 10.19693/j.issn.1673-3185.01356

Citation:

PDF (1961 KB)

Mechanical analysis about the gas spring support structure of the display and control console

Niu Feng

Jiangsu Automation Research Institute, Lianyungang 222061, China

More Information

Received Date: July 16, 2018
Available Online: May 07, 2021

This is an Open Access article distributed under the terms of the Creative Commons Attribution 4.0 International License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Graphical Abstract

Abstract

Abstract

Objectives The gas spring support structure of the military display and control console can effectively guarantee the automatic turning of the control unit under the action of the gas spring and slide rail. In order to enable the gas spring to provide effective support force, provide a basis for the assembly workers to adjust the support force of the gas spring, and reduce the scrap rate of the gas spring,
Methods the two-dimensional statics equation of the gas spring support structure was established based on the structure of the military console and the two-dimensional mechanical model of the gas spring support structure. By solving the equations in different states, the method of the support force of the gas spring support structure was proposed. Through practical application, the calculation method of the support force of the gas spring support structure was verified.
Results The verification results show that the results obtained by the calculation method of the support force of the gas spring support structure are consistent with those from practical experience.
Conclusions The calculation method of the support force of the gas spring support structure can be used as a basis for assembly workers to adjust the support force of the gas spring.
- military display and control console,
- gas spring support structure,
- support force,
- calculation method

FullText(HTML)

References (10)

References

[1]	顾金良, 李敬东.舰艇多功能显控台的未来发展展望[J].仪表技术, 2011(11):60-63. http://d.old.wanfangdata.com.cn/Periodical/ybjs201111019 Gu J L, Li J D. The development of shipbuilding multi-function console[J]. Instrumentation Technology, 2011(11):60-63(in Chinese). http://d.old.wanfangdata.com.cn/Periodical/ybjs201111019
[2]	李亮辉.浅析工程机械用气弹簧的设计选型[J].工程机械, 2013, 44(6):37-39. doi: 10.3969/j.issn.1000-1212.2013.06.009 Li L H. A primary analysis on design and selection of pneumatic spring used in construction machinery[J]. Construction Machinery and Equipment, 2013, 44(6):37-39(in Chinese). doi: 10.3969/j.issn.1000-1212.2013.06.009
[3]	周利民, 班正逸, 刘少峰.后背门气弹簧设计探析[J].汽车实用技术, 2013(11):70-75. doi: 10.3969/j.issn.1671-7988.2013.11.018 Zhou L M, Ban Z Y, Liu S F. The design and research of tail door gas spring[J]. Automobile Technology, 2013(11):70-75(in Chinese). doi: 10.3969/j.issn.1671-7988.2013.11.018
[4]	方益奇, 孙玲玲.气弹簧的刚度计算与安装位置研究[J].机床与液压, 2010, 38(8):70-71, 83. doi: 10.3969/j.issn.1001-3881.2010.08.026 Fang Y Q, Sun L L. Study on rigidity calculation and installation position of gas spring[J]. Machine Tool & Hydraulics, 2010, 38(8):70-71, 83(in Chinese). doi: 10.3969/j.issn.1001-3881.2010.08.026
[5]	文广南.气弹簧撑杆的安装研究[J].客车技术与研究, 2005, 27(4):20-21. doi: 10.3969/j.issn.1006-3331.2005.04.007 Wen G N. Research on the air spring support installation[J]. Bus Technology and Research, 2005, 27(4):20-21(in Chinese). doi: 10.3969/j.issn.1006-3331.2005.04.007
[6]	段明德, 刘鑫, 贾晓燕, 等.基于CATIA运动仿真的气弹簧安装位置设计[J].机械与电子, 2008(7):78-80. doi: 10.3969/j.issn.1001-2257.2008.07.027 Duan M D, Liu X, Jia X Y, et al. Design of the gas spring installation site based on the motion simulation of CATIA[J]. Machinery & Electronics, 2008(7):78-80(in Chinese). doi: 10.3969/j.issn.1001-2257.2008.07.027
[7]	朱宇光, 杨智勇, 朱海军, 等.气弹簧在骨骼服中的应用研究[J].机电工程, 2010, 27(2):8-10, 20. doi: 10.3969/j.issn.1001-4551.2010.02.003 Zhu Y G, Yang Z Y, Zhu H J, et al. Research on application of gas-spring in exoskeleton[J]. Journal of Mechanical & Electrical Engineering, 2010, 27(2):8-10, 20(in Chinese). doi: 10.3969/j.issn.1001-4551.2010.02.003
[8]	刘新柱, 王冬.理论力学[M].北京:北京航空航天大学出版社, 2011. Liu X Z, Wang D. Theoretical mechanics[M]. Beijing:Beihang University Press, 2011(in Chinese).
[9]	徐金明, 刘芳, 周亦骏. MATLAB应用基础[M].北京:清华大学出版社, 北京交通大学出版社, 2012. Xu J M, Liu F, Zhou Y J. Basic application of MATLAB[M]. Beijing:Tsinghua University Press & Beijing Jiaotong University Press, 2012(in Chinese).
[10]	林坤, 马朝选, 侯永伟, 等.通道式辐射监测系统箱体密封与支撑研究[J].舰船防化, 2014(3):33-37. http://www.cnki.com.cn/Article/CJFDTotal-JCFH201403012.htm Lin K, Ma C X, Hou Y W, et al. Study on sealing and supporting structure of channel radiation monitoring system[J]. Chemical Defence on Ships, 2014(3):33-37(in Chinese). http://www.cnki.com.cn/Article/CJFDTotal-JCFH201403012.htm

Cited By

Cited by

Periodical cited type(1)

邓锐，曹阳，黄显硕，侯闻韬. 地铁列车内饰运动机构可靠性多目标优化设计. 机车车辆工艺. 2023(04): 9-12+23 .

Other cited types(1)

Citation

XML

PDF in Chinese

Article views (408) PDF downloads (44) Cited by(2)

Mechanical analysis about the gas spring support structure of the display and control console

Abstract

References

Cited by

Periodical cited type(1)

Other cited types(1)

Catalog

Related

Mechanical analysis about the gas spring support structure of the display and control console

Abstract

References

Cited by

Periodical cited type(1)

Other cited types(1)

Catalog

Related

Export File

Citation

Format

Content